Generations  Generations / Daily Prime

Daily Prime - SDCC 2024 United Fractured Friendship Orion Pax & MORE!

We're drilling down on the recently announced SDCC 2024 Transformers Legacy Exclusive United Orion Pax VS Megatron Fractured Friendship 2-pack figure. Obviously, the animated movie was plotted long ago as it is no coincidence this is the third Generations Orion Pax figure we've had in the last two years. It is interesting that all of them have been partials, yet quite different from each other.

The most surprising here is they made Orion Pax taller, than the Gamer base. That and the added shoulder styling and longer gun brings this much closer to the IDW Stormbringer design. What is quite intriguing to me is what they did with the Studio Series Gamer Optimus Prime mold. I'll bet good money we see this mold again. The way they updated the chest, they can do all kinds of things. Already hinting at a possible Armada Optimus Prime with those arm guns. Even better would be an actual War Within Optimus Prime. Only time will tell, check out these in hand images comparing Orion Pax with Gamer Optimus Prime thanks to @ 杰哥~

More Daily Optimus Prime Features

16 Images - Click to Enlarge

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (1 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (2 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (3 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (4 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (5 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (6 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (7 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (8 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (9 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (10 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (11 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (12 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (13 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (14 of 16)

Daily Prime   SDCC 2024 United Fractured Friendship Orion Pax & MORE  (15 of 16)

Image Of SDCC 2024 United Fractured Friendship 2 Pack In Hand Transformers Legacy Exclusive  (16 of 16)

Transformers Poll

How do you like SDCC 2024 Orion Pax VS Megatron Fractured Friendship 2 Pack?

5 - Great
4
3 - Okay
2
1 - Lame
0 - Do not like



287 Votes

Poll Results

Data Center

Member Comments

Last 10 comments - ( Read All Posts )
TECHTRON 2024-07-03 @ 3:18 pm
22 hours ago, psxndc said:

Sorry, I’m new and dumb. Who’s the other bot in this pic: 

No worries! That is Orion Pax from the Transformers Legacy Evolution Humble Origins 2-Pack. ?

psxndc 2024-07-03 @ 4:38 am

Sorry, I’m new and dumb. Who’s the other bot in this pic: 

TECHTRON 2024-07-02 @ 10:44 pm

Sold. Done, they fixed everything wrong with the original mold!

  1. It's bigger
  2. The back of the vehicle mode is covered
  3. The gun is hand held (I feel like it's too small to be an arm cannon)                                                                                              

It keeps the best, and fixes the rest! (I would love it if it had the ax, but I can always use my other axes)

Joe Velez 2024-06-27 @ 5:38 pm

So that's what they were hinting at in one of those fanstreams. The larger Orion Pax was going to be a retool of SS GE WFC Optimus. I guess that makes more sense than a new mold. It looks decent enough in any event. I just thing that mold is super overrated. It's objectively worse than the deluxe from way back when in every way other than shear bulk. 

And I guess THAT'S the absolute last use of that Siege Megatron base mold. I mean, it has to be right? Takara has their clean Earthrise release and now Hasbro has their gladiator Megatron. At least it's the miner retool which is closer to the Siege base mold as that's so much better than the Earthrise retool Takara used. Still don't know how they messed up a great figure and turned it to shit like they did for the Earthrise retool. That takes some skill to do but they did it again for the Crankcase retool from Skids. Skids is great, Crankcase is horrible. 

The new parts look good. Pax has some crazy stuff going on in the rear of the vehicle now. That's a lot of new parts. The other new parts look good too. Still a shame it's the voyager WFC mold. Megatron has a new sword and a new hammer top for his pickaxe. Shame there's no spike ball to pretend to be his flail. Then we'd have to give Pax an axe...like maybe the one from the recent deluxe Pax. And like all third party upgrades have shown, trying to turn that GE arm cannon into an actual gun looks goofy as hell. But it's nice they tried. 

I drilled 5mm holes in the circles in the bottom of the feet of V WFC Prime. Then I gave him the gun from FoC Prime. Two actually and the sword from Magnus as I have a ton of extra of these. The guns look pretty good in vehicle mode. Not as good as they did on FoC Prime but still good. They can still be held by the correct peg for robot mode too as the V WFC Prime's hands aren't too big to fit. 

I was going to say something about the price but then I seen how much is added to Pax. But then I remembered that that Megatron mold has been used like 1348957283645234 times now and should cost about the same as a core class to use at this point which should've dropped the price a bit instead of it being raised from the price of two voyagers. I also wish Hasbro gave the Transformers brand those discounted price troopbuilder sets instead of releasing them at standard retail. SS Scorponok, SS Sweeps, SS Freezer, SS GE Decepticon Soldier even then -izers, Junkions and Infernacians? and so on. Give people a reason to get multiples right off the bat instead of waiting for them to drop to discount. I mean, without putting them in a four pack like they did with the Buzzworthy troopbuilder set. I didn't want multiples of that particular Seeker but the other three were great to get multiples of. I would rather have seen the Seekers in their own set with three or four different color versions in the box made from all four wing variants. This way the Dirge and Thrust molds can finally get some love as it's Ramjet that gets all the redecos. A discounted Insecticon clone set would be great too. Maybe as Salvo, Shothole and Zaptrap instead of straight reissues of Kickback, Shrapnel and Bombshell. 

Post Your Comment Now! (membership required)

Transformers Shops

Advertise Here on TFormers.com

Shop Online for Transformers SDCC

The affiliate links on this site may generate revenue for it when a purchase is made
Transformers Shopping



More Generations News & Reviews



Advertise on TFormers.com








This site uses cookies for site configuration, advertising, and analysis. By using this site you accept our policies - Read Full Site Policy OK
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Forums Communities: Toy Fans - Marvel Fans - Transformers Fans

@ToyNewsI Socials: Facebook - Twitter - Instagram

@MarvelousNews Socials: Facebook - Twitter - Instagram

@Tformers Socials: Facebook - Twitter - Instagram

@JediInsider Socials: Facebook - Twitter - Instagram

Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE